NAA .22 Mini-Revolver Review: It Serves a ‘Very’ Specific Purpose

North American Arms makes a selection of small semi-auto pistols, but they are perhaps best known for their series of Mini-Revolvers in a variety of different .22 caliber cartridges. They currently offer models in .22 Short, .22 Long Rifle, .22 Magnum, and a .22 Cap and Ball. This review is specifically about the .22 LR model with a 1 1/8-inch barrel, but the information is generally applicable to the other models of Mini-Revolvers that NAA offer as well.

North American Arms NAA Mini Revolver .22 LRThe NAA-22LR is very small, and would make an almost ideal ‘deep cover’ or ‘last ditch’ self-defense firearm. It isn’t quite as small as the .22 Short version, which has a shorter cylinder, and it doesn’t have quite the same power level as the .22 Magnum version either. It has a simple fixed-blade front sight that has been rounded to minimize snagging and it holds five rounds.

All the NAA revolvers I have seen or shot are very well made. They’re solid stainless steel construction, and use high-quality components for all other parts. The fit and finish is quite good, and there is nothing at all shoddy about them. The company also has a solid reputation for standing behind these guns if there is a problem.

The NAA-22LR is surprisingly easy to shoot. I have very large hands, and very small guns are usually a problem for me to shoot well. But most of the really small handguns I have shot are semi-automatics, which impose certain requirements on proper grip. The NAA Mini-Revolvers are completely different. First, they are Single Action only, meaning that you have to manually cock the hammer back before the gun will fire. Second, there is no trigger guard – something which may make novice shooters nervous. However, since the trigger does not extend until the hammer is drawn back, there really isn’t a safety issue with no trigger guard.

Further, the NAA Mini-Revolvers use an old trick of having the hammer rest on a ‘half-notch’ in what they call their “safety cylinder”. This position is between chambers in the cylinder, and ensures that the gun cannot fire when it is dropped. Again, you have to manually cock back the hammer in order to get the cylinder to rotate and then it’ll align a live round with the hammer.

North American Arms NAA Mini Revolver .22 LR HolsterOne option available on most of the Mini-Revolvers is their “holster grip”, which is a snap-open grip extension that also serves as a belt holster by folding under the bottom of the gun. It is an ingenious design and makes it much easier to hold and fire the gun.

About the only problem with the gun is a function of its very small design: reloading. You have to completely remove the cylinder, manually remove spent cases, load new rounds into each chamber, and then remount the cylinder. This is not fast nor easy, and effectively turns the gun into a “five shot only” self-defense gun. But realistically, if you’ve gotten to the point where you are relying on a NAA Mini-revolver for self defense, I have a hard time imaging there would be much of an opportunity to reload the thing regardless.

Another point to consider with the NAA-22LR: ballistics. We did test this model as part of our BBTI .22 test sequence. Suffice it to say that the 1 1/8-inch barrel had the poorest performance of any gun we tested in terms of bullet velocity/power, which is to be expected, and is a trade-off for the very small size of these guns.

Bottom line, the NAA Mini-Revolvers serve a very specific purpose, and are well-suited to that purpose.

MSRP is about $200 and the sale price isn’t much less. With the holster-grip, it’ll cost about $230.

Post your Comments