Remington Model 700 XCR

Description

The Remington Model 700 Extreme Conditions Rifle is a bolt-action hunting rifle chambered in 13 cartridges. The Model 700 was introduced by Remington in 1962 and has since been expanded to include more than 30 sub-models, but what makes the XCR different from other Model 700s is that it employs a synthetic stock and the metal surfaces have been coated with a TriNyte finish.

TriNyte is a Remington patented corrosion resistant, electroless nickel coating. In a nutshell, electroless
nickel plating deposits a nickel finish on the metal’s surface without
using an electric current. This procedure deposits the finish evenly as
opposed to an electroplating nickel finish. This process produces a very durable finish, however, compared to the latter process, it said not to have as long of a lifespan. TriNyte is typically applied to weapons designed for wet conditions like the Marine Magnum.

Remington says the Model 700’s action forms “three rings of steel,” meaning it uses a push-feed action where the bolt pushes the round towards the chamber and the extractor does not grab the rim of the cartridge until the bolt is completely forward and locked. It doesn’t affect the smoothness of the action, but does cater to one’s preference. Some prefer the push-feed action over a control-round feed action (which does the opposite). Also, according to Remington, the Model 700’s receiver was milled from a single piece of steel, so it’ll be more resistant to wear overtime than those not milled from a single piece of steel. A durable receiver is necessary especially when absorbing the force of the initial explosion that sets off heavier loads.

All Model 700 XCR models include Remington’s patented X-Mark Pro adjustable trigger system, which has a pull weight of 3.5 pounds with two pounds of adjustment to suit the shooter’s individual needs. What’s unique about the X-Mark Pro trigger system is that it can be adjusted externally.  Also, the XCR has Hogue patented rubber overmolding on the grip and fore-end of the stock. The soft rubber grips are intended to provide comfort and help the shooter maintain positive control when absorbing harsh recoil.

Remington recommends the XCR for hunting in inclement weather, however, the company has discontinued this particular model.

rem_700-xcr1

Specifications

.270 Win.
Caliber:.270 Win.
Capacity:4
Features:Discontinued
TriNyte corrosion resistant finish; X-Mark Pro adjustable trigger; and Hogue brand overmolding grips
Action:Bolt
Stock:Synthetic/black
Material/Finish:Stainless steel/TriNyte
Scope:Drilled and tapped for scope mounts
Website:http://www.remington…
Weight:7.375 pounds
Barrel Length:24"
Twist:1 in 10"
Length of Pull:13.375"
Overall Length:44.5"
Drop at Comb:1.125"
Drop at Heel:1.375"
.30-06 Springfield
Caliber:.30-06 Springfield
Capacity:4
Features:Discontinued
TriNyte corrosion resistant finish; X-Mark Pro adjustable trigger; and Hogue brand overmolding grips
Action:Bolt
Stock:Synthetic/black
Material/Finish:Stainless steel/TriNyte
Scope:Drilled and tapped for scope mounts
Website:http://www.remington…
Weight:7.375 pounds
Barrel Length:24"
Twist:1 in 10"
Length of Pull:13.375"
Overall Length:44.5"
Drop at Comb:1.125"
Drop at Heel:1.375"
7mm Rem. Mag.
Caliber:7mm Rem. Mag.
Capacity:3
Features:Discontinued
TriNyte corrosion resistant finish; X-Mark Pro adjustable trigger; and Hogue brand overmolding grips
Action:Bolt
Stock:Synthetic/black
Material/Finish:Stainless steel/TriNyte
Scope:Drilled and tapped for scope mounts
Website:http://www.remington…
Weight:7.625 pounds
Barrel Length:26"
Twist:1 in 9.25"
Length of Pull:13.375"
Overall Length:46.5"
Drop at Comb:1.125"
Drop at Heel:1.375"
.270 WSM
Caliber:.270 WSM
Capacity:3
Features:Discontinued
TriNyte corrosion resistant finish; X-Mark Pro adjustable trigger; and Hogue brand overmolding grips
Action:Bolt
Stock:Synthetic/black
Material/Finish:Stainless steel/TriNyte
Scope:Drilled and tapped for scope mounts
Website:http://www.remington…
Weight:7.625 pounds
Barrel Length:26"
Twist:1 in 10"
Length of Pull:13.375"
Overall Length:46.5"
Drop at Comb:1.125"
Drop at Heel:1.375"
.300 WSM
Caliber:.300 WSM
Capacity:3
Features:Discontinued
TriNyte corrosion resistant finish; X-Mark Pro adjustable trigger; and Hogue brand overmolding grips
Action:Bolt
Stock:Synthetic/black
Material/Finish:Stainless steel/TriNyte
Scope:Drilled and tapped for scope mounts
Website:http://www.remington…
Weight:7.375 pounds
Barrel Length:24"
Twist:1 in 10"
Length of Pull:13.375"
Overall Length:44.5"
Drop at Comb:1.125"
Drop at Heel:1.375"
.338 Win. Mag.
Caliber:.338 Win. Mag.
Capacity:3
Features:Discontinued
TriNyte corrosion resistant finish; X-Mark Pro adjustable trigger; and Hogue brand overmolding grips
Action:Bolt
Stock:Synthetic/black
Material/Finish:Stainless steel/TriNyte
Scope:Drilled and tapped for scope mounts
Website:http://www.remington…
Weight:7.375 pounds
Barrel Length:24"
Twist:1 in 10"
Length of Pull:13.375"
Overall Length:44.5"
Drop at Comb:1.125"
Drop at Heel:1.375"
7mm Rem. Ultra Mag.
Caliber:7mm Rem. Ultra Mag.
Capacity:3
Features:Discontinued
TriNyte corrosion resistant finish; X-Mark Pro adjustable trigger; and Hogue brand overmolding grips
Action:Bolt
Stock:Synthetic/black
Material/Finish:Stainless steel/TriNyte
Scope:Drilled and tapped for scope mounts
Website:http://www.remington…
Weight:7.625 pounds
Barrel Length:26"
Twist:1 in 10"
Length of Pull:13.375"
Overall Length:46.5"
Drop at Comb:1.125"
Drop at Heel:1.375"
.300 Rem. Ultra Mag.
Caliber:.300 Rem. Ultra Mag.
Capacity:3
Features:Discontinued
TriNyte corrosion resistant finish; X-Mark Pro adjustable trigger; and Hogue brand overmolding grips
Action:Bolt
Stock:Synthetic/black
Material/Finish:Stainless steel/TriNyte
Scope:Drilled and tapped for scope mounts
Website:http://www.remington…
Weight:7.625 pounds
Barrel Length:26"
Twist:1 in 9.5"
Length of Pull:13.375"
Overall Length:46.5"
Drop at Comb:1.125"
Drop at Heel:1.375"
.338 Rem. Ultra Mag.
Caliber:.338 Rem. Ultra Mag.
Capacity:3
Features:Discontinued
TriNyte corrosion resistant finish; X-Mark Pro adjustable trigger; and Hogue brand overmolding grips
Action:Bolt
Stock:Synthetic/black
Material/Finish:Stainless steel/TriNyte
Scope:Drilled and tapped for scope mounts
Website:http://www.remington…
Weight:7.625 pounds
Barrel Length:26"
Twist:1 in 10"
Length of Pull:13.375"
Overall Length:46.5"
Drop at Comb:1.125"
Drop at Heel:1.375"
.375 Rem. Ultra Mag.
Caliber:.375 Rem. Ultra Mag.
Capacity:3
Features:Discontinued
TriNyte corrosion resistant finish; X-Mark Pro adjustable trigger; and Hogue brand overmolding grips
Action:Bolt
Stock:Synthetic/black
Material/Finish:Stainless steel/TriNyte
Scope:Drilled and tapped for scope mounts
Website:http://www.remington…
Weight:7.625 pounds
Barrel Length:24"
Twist:1 in 12"
Length of Pull:13.375"
Overall Length:46.5"
Drop at Comb:1.125"
Drop at Heel:1.375"
.25-06 Rem.
Caliber:.25-06 Rem.
Capacity:4
Features:Discontinued
TriNyte corrosion resistant finish; X-Mark Pro adjustable trigger; and Hogue brand overmolding grips
Action:Bolt
Stock:Synthetic/black
Material/Finish:Stainless steel/TriNyte
Scope:Drilled and tapped for scope mounts
Website:http://www.remington…
Weight:7.375 pounds
Barrel Length:24"
Twist:1 in 10"
Length of Pull:13.375"
Overall Length:44.5"
Drop at Comb:1.125"
Drop at Heel:1.375"
7mm-08 Rem.
Caliber:7mm-08 Rem.
Capacity:4
Features:Discontinued
TriNyte corrosion resistant finish; X-Mark Pro adjustable trigger; and Hogue brand overmolding grips
Action:Bolt
Stock:Synthetic/black
Material/Finish:Stainless steel/TriNyte
Scope:Drilled and tapped for scope mounts
Website:http://www.remington…
Weight:7.25 pounds
Barrel Length:24"
Twist:1 in 9.5"
Length of Pull:13.375"
Overall Length:43.625"
Drop at Comb:1.125"
Drop at Heel:1.375"
.375 H&H Mag.
Caliber:.375 H&H Mag.
Capacity:3
Features:Discontinued
TriNyte corrosion resistant finish; X-Mark Pro adjustable trigger; and Hogue brand overmolding grips
Action:Bolt
Stock:Synthetic/black
Material/Finish:Stainless steel/TriNyte
Scope:Drilled and tapped for scope mounts
Website:http://www.remington…
Weight:7.625 pounds
Barrel Length:26"
Twist:1 in 10"
Length of Pull:13.375"
Overall Length:46.5"
Drop at Comb:1.125"
Drop at Heel:1.375"
MSRP$0.00

Editor Review