Don't Overlook the Ruger Mini 14

In 1957, the US military sought to simplify its arsenal by using one rifle, the M14. But instead of designing a new platform they just added the features they wanted, like larger magazine capacity and higher cyclic rate, to something that already existed. So long story short it didn’t work, like a lot of all-purpose products. It was too heavy or too light depending on how it was used, its magazine capacity wasn’t a huge improvement, and, when carried in the humid jungles of Vietnam, the wooden stock proved to be problematic.

However, while the M14 didn’t work out for the military, the design and features have worked out well in the civilian market, especially with the Ruger Mini-14.

ruger mini m14 rifle

Ruger introduced the Mini-14 shortly after the M14 was replaced by the M16, and it was, in fact, just a scaled down version of the M14. Instead of a 22-inch barrel and 11.5-pound overall weight, the Mini had an 18-inch barrel and weighed 6.5 pounds. Ruger was able to cut down the weight, not only by shortening the barrel, but by using alloy steel for the receiver. But the kicker is the Mini-14 was chambered for the much smaller .223 Remington (5.56 NATO) rather than the .308 Winchester (7.62 NATO).

And it was popular too. The shooting community liked it for two reasons. First, it used the rugged and uber-reliable Garand-style gas-operating system. And second, like a lot of Ruger’s rifles, it was reasonably priced.

However, like the M14, the Mini had problems – mainly with accuracy. Early models were designed with very thin barrels and, although the .223 is significantly smaller than .308, the cartridge still released a heavy explosion, which could rattle the barrel in turn throw off the trajectory of the round.

Ruger now designs the Mini-14 to be more durable by using a stiffer and heavier barrel and constructing the carbine with tighter tolerances. The barrel is actually hammer forged, a process created by Germans during WWII. It is known for improved durability as well as accuracy. Many comparable platforms like ARs have hammer forged barrels. Basically, the Mini-14’s accuracy is no longer in question. As I tested the Ranch Rifle, I consistently averaged two-inch groups at a hundred yards.

For a little while Ruger produced select fire Mini-14s that was marketed towards law enforcement, but alas it didn’t catch on. Because of the lighter construction it shared the same fate as the M14.

But today there are four types of Mini-14s: the Ranch Rifle, the Target Rifle, the Tactical Rifle, and the Mini Thirty. They all have their strengths.

The Ranch Rifle is the standard, so you can’t go wrong with it there. Traditional stock design, ghost ring rear sight, and integral scope mounts.

The Target Rifle is available with either a synthetic stock or a laminated one with a thumbhole. But it also features an adjustable harmonic dampener, which assists in controlling barrel harmonics (this is going back to controlling barrel vibrations).

The Tactical is the most modular. It was designed to keep up with accessory friendly AR market. It shares the same features as the Ranch Rifle plus a pistol grip and extendable stock.

And the Mini Thirty shares the same features as the Ranch Rifle, but is chambered for .308 Winchester (7.62 NATO) 7.62x39mm.

A Mini-14 is a great alternative if you’d rather not get an AR platform. Or if you want an AR platform, it’s definitely something to consider. MSRP for the Mini averages $900, but it can be found for closer to $600 to $700.

Read More On:

Latest Reviews