Model 700 VTR A-TACS

The Remington Model 700 Varmint Tactical Rifle A-TACS is a bolt-action hunting rifle chambered in .308 Win. The Model 700 was introduced by Remington in 1962 and has since been expanded to include more than 30 sub-models. What makes the VTR unique to the 700 family is that it has a vented fore-end and a triangular barrel.

Ideally the a triangular barrel is supposed to balance tension and compression in turn allow the projectile to travel smoothly through the bore. It is said that a triangular barrel is, in fact, more accurate than a round barrel, however, the industry standard is round, so everything else like the stock and bedding are designed for a round barrel.

Remington says the Model 700’s action forms “three rings of steel,” meaning it uses a push-feed action where the bolt pushes the round towards the chamber and the extractor does not grab the rim of the cartridge until the bolt is completely forward and locked. It doesn’t affect the smoothness of the action, but does cater to one’s preference. Some prefer the push-feed action over a control-round feed action (which does the opposite). Also, according to Remington, the Model 700’s receiver was milled from a single piece of steel, so it’ll be more resistant to wear overtime than those not milled from a single piece of steel. A durable receiver is necessary especially when absorbing the force of the initial explosion that sets off heavier loads.

The Model 700 VTR features a 22″ blued carbon steel barrel with an integral muzzle break that helps decrease recoil and muzzle jump. On the tip of the barrel is a target crown that helps maintain barrel harmonics. Barrel harmonics refers to the vibrations in the barrel after the initial explosion sets off the round. They can become so violent that they can throw off the round’s trajectory. The VTR has a synthetic stock with A-TACS camouflage finish and black overmold grips similar to those found in XCR models. The overmold grips are made of soft rubber and are intended to provide comfort and help the shooter maintain positive control of the rifle while absorbing harsh recoil. The VTR is also equipped with Remington’s patented X-Mark Pro adjustable trigger system, which has a pull weight of 3.5 pounds with two pounds of adjustment to suit the shooter’s individual needs. What’s unique about the X-Mark Pro trigger system is that it can be adjusted externally.

Remington recommends the VTR A-TACS for general varmint/tactical applications.

Read More On:

Latest Reviews