WINCHESTER SXP

Product Information & Specs

Seller Description For This Firearm

Winchester SXP 12 Gauge Pump-Action Shotgun (28” Barrel, Vent Rib, Invector-Plus Choke System)
Product Overview

The Winchester Super X Pump (SXP) is a pump-action shotgun chambered in 12 Gauge and designed for field, sporting, and general-purpose shotgun applications. This model features a 28-inch vent rib barrel and is configured for 2¾-inch and 3-inch shells, utilizing the Invector-Plus choke system for interchangeable choke tube compatibility.

The SXP platform is part of Winchester’s long-running Super X family of shotguns, which are recognized for their cycling speed, mechanical simplicity, and broad adaptability across different shooting disciplines.

Action and Operating System

The Winchester SXP operates using a pump-action mechanism rather than a semi-automatic system. The action is manually cycled by the shooter using the fore-end. When the fore-end is moved rearward, the spent shell is extracted and ejected. When moved forward, a new shell is chambered from the tubular magazine.

The SXP is engineered with a rotary bolt system and a speed-oriented action design intended to reduce cycling time and improve efficiency during repeated firing sequences. The design emphasizes mechanical reliability and consistent function across a variety of shell types within the chambering specifications.

Because it is a pump-action system, the firearm is not dependent on gas operation, recoil operation, or electronic components for cycling. This allows it to function with a broad range of ammunition that meets SAAMI specifications.

Gauge and Chambering

This shotgun is chambered in 12 Gauge, one of the most widely used shotgun calibers. The 12 Gauge platform supports a variety of load types, including light target loads, field loads, buckshot, and slug ammunition, depending on intended application and barrel/choke configuration.

The chamber is designed to accept both 2¾-inch and 3-inch shells. This dual compatibility allows flexibility in ammunition selection based on recoil preference, intended use, and ballistic requirements.

Users should always ensure ammunition matches the firearm’s chamber markings and consult manufacturer guidelines prior to use.

Barrel Specifications

The firearm is equipped with a 28-inch barrel. This barrel length is commonly associated with field and sporting shotguns due to its balance between sight radius, swing dynamics, and overall handling characteristics.

The barrel features a vent rib design along the top surface. The vent rib provides a raised sighting plane that assists in maintaining alignment during target tracking, particularly in upland hunting and clay target applications.

The barrel configuration supports consistent shot patterning when paired with appropriate Invector-Plus choke tubes.

Invector-Plus Choke System

This shotgun utilizes the Invector-Plus choke system, a threaded choke tube interface developed by Winchester. The system allows the user to change choke constriction depending on shooting application and desired shot pattern.

Invector-Plus choke tubes are designed to extend beyond the standard barrel diameter, providing improved shot pattern performance and compatibility with a wide range of choke constrictions, including options for close-range, mid-range, and long-range applications.

Choke selection should always be matched to ammunition type and intended shooting environment.

Receiver and Construction

The Winchester SXP is built around a steel receiver and polymer or hardwood furniture depending on specific configuration. The design emphasizes durability while maintaining manageable overall weight.

The receiver houses the rotary bolt system and internal action components. The bolt design contributes to smooth cycling and secure lock-up during firing.

The overall construction is intended for repeated field use under varying environmental conditions. The materials used are selected to balance durability, corrosion resistance, and functional reliability.

Feeding System

The shotgun uses a tubular magazine located beneath the barrel. Shells are loaded through the receiver loading port and stored in the magazine tube until chambered.

The capacity of the magazine varies depending on configuration and shell length, subject to applicable regulations and installed magazine restrictions.

Safety and Controls

The Winchester SXP includes a manual safety mechanism located for accessibility during standard handling. The safety is designed to block trigger movement when engaged.

The pump-action design also requires manual cycling for each shot, adding an additional layer of mechanical control over firing sequence.

Sighting System

Most configurations of the SXP with vent rib barrels include a front bead sight. The bead sight provides a simple aiming reference point suitable for moving targets and field shooting applications.

The vent rib aids in maintaining a consistent sight picture by elevating the sighting plane above the barrel surface.

Key Specifications
Manufacturer: Winchester Repeating Arms
Model: Super X Pump (SXP)
Gauge: 12 Gauge
Action: Pump Action (Rotary Bolt System)
Barrel Length: 28 Inches
Barrel Type: Vent Rib
Chamber: 2¾-inch and 3-inch
Choke System: Invector-Plus
Magazine Type: Tubular Magazine
Receiver: Steel Construction
Sights: Front Bead (typical configuration)
Configuration: Field / Sporting Shotgun
Condition Considerations

As a pre-owned firearm, individual condition may vary based on prior use, maintenance history, and storage conditions. Prospective purchasers should inspect:

Bore condition
Barrel and choke threads
Receiver finish
Stock and fore-end condition
Action smoothness and cycling
Magazine spring function
Included choke tubes and accessories

Any original packaging, manuals, or additional choke tubes should be verified at the time of inspection.

Summary

The Winchester SXP 12 Gauge is a pump-action shotgun featuring a 28-inch vent rib barrel and compatibility with 2¾-inch and 3-inch shells. Utilizing the Invector-Plus choke system, it provides configurable shot pattern control for a variety of field and sporting applications. Its rotary bolt pump-action design and steel receiver construction contribute to its mechanical reliability and broad utility in shotgun shooting disciplines.

UPC ECOM00579439
Action SEMI AUTOMATIC
Barrel Length 28.00" BARREL
Capacity 4 ROUNDS
Finish BLACK
Gauge 12 GA
guns.com logo WARNING













PEACE OF MIND
PEACE OF MIND

Shopping at Guns.com gives you the backing of a company that is committed to your satisfaction.  And unlike our competitors, it extends beyond the buying process.  We get the FFL from your store – others make you find it, copy it, and fax it.  We have a generous return policy, and handle everything – you don’t have to go back to the store.  And our Rangemasters are here to answer all your questions about our products or process.  We're bringing a level of service to the online gun buying experience that is unheard of.























WE SUPPORT LOCAL GUN
STORES
WE SUPPORT LOCAL GUN STORES

Many online gun sales actually take away from your local community.  Instead of buying a gun that’s on your local store’s shelf, most retailers drop ship it from a warehouse in another state.  At Guns.com, if an FFL is part of our network, we sell THEIR guns first whenever possible.  That way, we’re helping small businesses in your community AND if they have it in stock, you can pick your gun up IMMEDIATELY – it’s how business should be done.























WE KEEP IT SIMPLE
WE KEEP IT SIMPLE

Most everything can be easily bought online these days.  But for some reason, buying a gun online can be complicated.  Most websites are poorly organized, don’t tell you a lot about what you’re buying, and leave you on your own to figure out what you want.  Guns.com is built to be simple – easily organized products, useful descriptions from experts, and support to guide you to the right choice.  Spend your time enjoying the gun you want, not getting frustrated with a complex website that makes gun buying hard.

Latest Reviews


revolver barrel loading graphic

Loading